LASER
CUT
LASER
CUT
JULIUS KOCH WEBTEX
HUBER TEXBAND®
LASER CUT WITH RCM MARKING-SYSTEM
Due to the laser cut, the edges of the tape are sealed and are thus better protected against fraying. Both ends are marked with a fold embossing for the subsequent sewing process. This marking can be set between 15 and 30 mm from the end or beginning of the tape. Due to the light marking in the tape, the length accuracy from fold to fold can be maintained very precisely, even by less experienced personnel.
DOUBLE IS BETTER
The tape is transported by two synchronously driven transport rollers (top and bottom) with double drive.
The film reel is driven by a motor when the tape is pulled off. The speed is controlled by a laser distance sensor. The roller dancer with sensor control ensures tension-free tape take-off.
Because of that, the working speed of the machine is very high. It can cut up to 350 tapes that have a lenght of 2 m within one hour.
TAPE THICKNESS CONTROL
During transport, the tape is checked for thickness differences (accuracy 0.01 mm) via a special sensor, so that no tapes with a seam connection can enter further processing.
As soon as this thickened area is detected (e.g. by a sewn-together tape), the LaserCut stops the tape transport.
EASY HANDLING
To prevent the cut lift tapes from falling to the floor, a stacker is attached. Up to 30 pieces can be clamped in the stacker and released with a push of a button.
Variants
The LaserCut is available in two different versions.
-
LaserCut Eco
The LaserCut Eco is the basic machine and is suitable for small and medium production lines.
The basic equipment includes:
- RCM marking system
- Laser cutting for sealed edges
- Driven transport roller at the bottom
- Rigid film spool holder
- Length and quantity freely adjustable
-
LaserCut Pro
The LaserCut Pro is the fully equipped machine and is suitable for larger production outputs.
In addition to the basic equipment, the following additional features belong to the LaserCut Pro:
- Roller dancer with sensor control for tension-free tape removal
- Speed control with laser distance sensor
- Driven film spool shaft
- Tape error control system
- Stacker for clamping the already cut tapes
Technical details
The data may vary depending on the version.
-
Working speed
up to 350 pcs. à 2m per hour
-
Processable fabric types
Webtex of Julius Koch
TEXBAND® of Huber Bandfabrik -
Connections
Electric: 230V / 60Hz
Pneumatic: stable 6 bar, dry, oil-free, 100l/min (Class 0) -
Dimensions and weight
Height: 625mm
Length: 850mm
Width: 435mm
Weight: ca. 30 kg
