Skip to main content

Electronic bartacker RTC-KE430

Electronic automatic bartacker with direct drive type Brother RTC-KE430 for sewing the bartacks on previously cut lifttapes.

Application

This electronic bartacking machine is for sewing the bartacks to the cut lifttapes. It can be used as a stand-alone machine or directly next to the cutting machine to ensure a continuous and smooth production flow.

With the sewing template for 6, 8 and 10 mm wide lifttapes incl. base plate, the tapes can be sewn easily, safely and quickly. Changing the sewing template takes only a few seconds with the optional quick-change system.

If the lifttape cutter and automatic bartacker are combined at one workstation, a touch panel with integrated PC can be connected to the cutting machine as an expandable option. With this PC, different jobs can be stored or read in and quickly retrieved. This increases productivity and efficiency.

Work operations

Characteristics

  • Seam image zig-zag bar lengthwise or crosswise to the tape.
  • The respective programmes can be called up directly via the keyboard.
  • Fast sewing cycle for high production output.
  • Base plate with sewing template for 6, 8 or 10mm take-up tape with special finger protection.
  • Special thread cutter for short thread ends.
  • Thread wiper; standard hook; clamp ventilation.
  • Stitch rate maximum 3'200 stitches/minute.
  • AC servo motor 550W (direct drive); single-phase 230V.
  • LED sewing light integrated.
  • Reinforced steel frame, height adjustable.
  • Complete with sewing table, foot pedal, steel frame and sewing lamp.
  • Machine weight complete 70kg.
  • Special features:
    - larger multilayer table top 110 x 69cm
    - adapted needle hole
    - includes 3 sewing programmes for 6, 8 and 10mm lifttape
    - further customised seam programmes on request
  • Options:
    - Quick-change system for sewing clamps (sewing templates for 6, 8 and 10mm wide lifttapes)

Your benefits

  • Can be combined with any cutting machine.
  • Simple operation.
  • Extremely low risk of injury due to finger protection.
  • High-quality components and workmanship of the machine.
  • Fast sewing cycle for high production output.
  • Templates for 6, 8 and 10 mm wide lifttape guarantees high quality and a clean seam pattern.
  • With quick-change system, the inserts can be changed within a few seconds.
  • Optional touch panel for cutting machine ensures even higher productivity at the combined workstation.

Extendable options

Touch panel with integrated PC 

This optional system is ideal when the automatic bartacker and the cutting machine are operated by one person at a combined workstation.

  • Using the large 10-key keypad on the control panel, length and number can be sent directly to the control unit in order to process individual tapes.
  • Data (daily production) can be read in from the network or USB stick via the list in order to process them one by one.
  • Within the list, the orders can be selected as desired.
  • Orders are automatically marked green and locked after each processing.
  • When the order has been processed, it automatically jumps down one order.
  • Red lines (orders) are not yet processed; blue line (order) = active processing.
  • Length and number of orders can be adjusted via "edit".
  • Panel PC with resistive touch-screen; screen size 12.1" SVGA (24 x 18 cm).
  • 1.6 GB CPU; 2GB DDR3 memory; 64GB 2.5" SATA Flash Disk; Windows7 Embedded.
  • Fanless HMI barebone; Aluminium Chasis; RJ45 and USB-2 connection.