Automatic cutting machine with rigid film spool holder for cutting Texband for horizontal slat blinds. With the RCM marking system, a fold marking can be applied to the ends of the Texband.
Both models (Tex-78 and Tex-79) have a motor power of 300 Ncm for the transport/pull-off of the tape. On both models, only the lower transport roller is driven. The upper roller is not driven and runs loosely. All transport rollers are carbide coated.
While the Tex-78 has a rigid film spool holder, the Tex-79 model has a mechanical rocker take-off, which allows a slightly higher speed of tape take-off and thus increases productivity.
All models have the special RCM marking system integrated, which ensures the exact position of the fold mark at the beginning and end of the Tex tape. This RCM marking system ensures that finishing and handling, such as sewing the bartack, is quick and easy.
This transverse marking with a slight bend in the tape means that the length accuracy from fold to fold can be maintained very precisely, even by less experienced personnel.
Lower transport roller driven
Upper roller loose running, not driven
Rollers with carbide coating
Transport speed adjustable; maximum tractive force of drive motor 300 Ncm
Rigid film spool holder, only suitable for slow belt running speeds
Piece length and number adjustable on display
Length input in mm
Cutting unit with pneumatic scissors
Machine surface with film spool holder, LxWxH: 80x30x40 cm
Total weight 21 kg
Working pressure 6 bar
Power 230 Volt 60Hz
Mechanical rocker take-off for smooth and jerk-free tape take-off. This allows a higher speed and increases productivity.
All other data are identical to the RTC-207-Tex-78
RCM Marking-System for type LDM and LDMD
Fold for easy recognition of the loop bend point
Embossing distance front and back freely adjustable from 5 to 30 mm
Embossing unit can be switched on electronically
Low space requirement
High-quality components and processing of the machine
Good quality output of the cut Texbands
Electronic automatic bartacker with direct drive type Brother RTC-KE430
This automatic bartacker can be placed directly next to the Texband machine to ensure a continuous and smooth production flow.
The main features of this automatic bartacker are:
Special thread cutter for short thread ends
Thread wiper; standard hook; staple lifter
Stitch rate maximum 3'200 stitches/minute
AC servo motor 550W (direct drive); single-phase 230V
Recurring jobs can be displayed as barcodes in an Excel file (included in the delivery). These barcodes can, for example, be printed out collectively on a sheet and placed at the machine. The barcode scanner is connected directly to the machine and thus recurring orders can be processed quickly and efficiently. The barcode scanner can be used with any Texband Cutter of the type RTC-207.